CCS code - Graph utility (temperature monitoring)

Do check the youtube video on Graph Tool of CCS : 

Do SUBSCRIBE to my channel!

I have used this code for temperature monitoring: 

#include <msp430g2553.h>

int temp = 0;

int temp1 =0;

void main(void){

WDTCTL = WDTPW | WDTHOLD; //stop the watchdog timer

//Select 1.5 V, 64 clock cycles, enable ADC interrupt, Turn on the reference generator

ADC10CTL0 = SREF_1 + REFON + ADC10ON + ADC10SHT_3 + ADC10IE;

//Select input channel 10 and divide the clock frequency by 4

ADC10CTL1 = INCH_10 + ADC10DIV_3;

while(1){

//Enable and Start conversion

ADC10CTL0 |= ENC + ADC10SC;

//Enter low power mode

__bis_SR_register(LPM0_bits + GIE);

//fetch the temperature value from ADC10MEM register

temp1 = ADC10MEM;

//convert it into degree celsius

temp = ((temp1 * 27069L - 18169625L)>>16);

}

}

//ISR

#pragma vector = ADC10_VECTOR

__interrupt void adc_interrupt(void)

{

__bic_SR_register_on_exit(CPUOFF);

}

MSP430 with a DC motor

The explanation for this project can be found here: Video explanation

Subscribe to the channel for more such content.

Below is the code:

#include <msp430g2553.h>

int count = 0;

void main()

{

WDTCTL = WDTPW | WDTHOLD;   // Stop watchdog timer

P1DIR |= BIT6|BIT2;

P1SEL |= BIT6; //P1.6 TA0.1 output signal for DC motor

P1OUT &= ~(BIT2);  //P1.2 for DC motor 

P1DIR &= ~BIT3; //Button P1.3

P1REN |= BIT3;

P1OUT |= BIT3;

P1IE |= BIT3;

P1IES |= BIT3;

CCR0 = 1000-1;

CCTL1 = OUTMOD_7;

__enable_interrupt();

__low_power_mode_0();

}

#pragma vector=PORT1_VECTOR

__interrupt void P1_Func()

{

int i = 0;

count = count + 1;

switch (count)

{

case 1: CCR1 = 850-1;

TACTL = TASSEL_2 + MC_1;

break;

case 2: CCR1 = 250-1;

count = 0;

break;

}

while(i<500)

{

if((P1IN&BIT3))

i++;

else

i=0;

}

P1IFG &= ~BIT3;

}